Industrial Fans | Piller

PILLER‘s unique blowers combine high efficiency with high performance. The consistent design starting from the casing over the impeller and shaft seal system to the patented bearings makes possible to use PILLER blowers in almost any applications where high pressure, high temperature or a combination of both is needed. Also corrosive products in the gas stream, combined with water are challenges that PILLER blowers can deal with.

Enquire Now

General Plant Engineering Fans

1-General-Engineering-Fan

Features

7346 KX 40900 with vane control

Specifications

Volume flow – 10,6 m³/s
Total pressure difference – 8,3 kPa
Intake temperature – 120 °C
Motor power – 132 kW
Speed level – 2980 1/min
Impeller diameter – 1250 mm

Chemical Industry

2-Chemical-Engineering-Fan

Features

Radial fan 4-stage, for a chemical process plant
Casing and shaft: Inconel Alloy 825.
Impeller: Hastelloy Alloy C4.

Specifications

Volume flow – 6,5 m³/s
Total pressure difference – 42,8 kPa
Intake temperature – 150 °C
Motor power – 600kW
Speed level – 3600 1/min
Impeller diameter – 930 mm

Industrial Furnace

3-Industrial-Furnace

Features

Specifications

Volume flow – 5,10 m³/s
Total pressure difference – 0,15 kPa
Intake temperature – 800 °C
Motor power – 11,0 kW
Speed level – 1450 1/min
Impeller diameter – 710 mm

Steel & Mill Power Plant

4-Steel-Mill-and-Power-Plants

Features

Two-pass for the electrical furnace of a dust exhausting equipment at a steel work

Specifications

Volume flow – 164 m³/s
Total pressure difference – 5,4 kPa
Intake temperature – 130 °C
Motor power – 1250 kW
Speed level – 990 1/min
Impeller diameter – 2380 mm

Mechanical Vapor Recompression

5-Mechanical-Vapour-Recompression

Features

Specifications

Mass flow – 31000 KG/H
Inflow pressure – 250,08 kPa
Inflow temperature – 65 °C
Density by intake state – 161 g/m³
Internal efficiency – 86 %
Power requirement on shaft – 6,3 kW
Speed level – 2950 1/min

Petrochemical Industry

6-Petrochemical-Industry

Features

Regeneration blower for petrochemical application

Specifications

Volume flow – 6,7 m³/s
Total pressure difference – 8,93 kPa
Intake temperature – 510 °C
System pressure – 3380 mbar
Speed level – 2970 1/min

Waste Water Treatment

7-Waste

Features

Waste Water Treatment

Specifications

• Compressor types
• The PillAerator concept
• The magnetic bearing concept
• The PillAerator software
• Measurement and PID
• Compressor characteristics
• The PillAerator BrainBox
Price: RM0.00
Categorized in